Page 1
Cold Water Rheology Kit Instruction Manual Manual No. 372144, Revision E Instrument No. 207952 or 207953 Fann Instrument Company...
Page 2
® FANN and the FANN logo are registered trademarks of Fann Instrument Company in the United States and/or other countries. All other trademarks mentioned in the operating instructions are the exclusive property of the respective manufacturers.
Cold Water Rheology Kit Instruction Manual Table of Contents Introduction ......................... 4 1.1 Document Conventions ..................5 Safety ......................... 6 Features and Specifications ..................7 Equipment Setup ......................9 Operation ........................10 Troubleshooting and Maintenance ................11 Parts List ........................12 Warranty and Returns ....................
Cold Water Rheoogy Instruction Manual Introduction The Cold Water Rheology Kit is an accessory for the Fann Model 35 Viscometer. Operators use this kit with the Model 35 when measuring rheological properties of drilling fluids at temperatures less than 70 F (21.1...
Cold Water Rheoogy Instruction Manual Document Conventions The following icons are used in this manual to distinguish elements of text. Notes emphasize additional information that may be useful to the reader. Caution messages give directions that, if not observed, could result in loss of data or in damage to equipment.
Cold Water Rheology Instruction Manual Safety Follow appropriate safety measures and wear proper personal protective equipment (PPE), especially hand protection. Be aware of exposure to temperature extremes. Please make sure that the power available matches the voltage labeled on the circulating bath.
Cold Water Rheology Instruction Manual Features and Specifications The Cold Water Rheology Kit is compact and portable. Its components are contained in a durable carrying case. This kit includes a digital circulating bath and a double-walled sample cup. To maintain the temperature, insulating material is also included to cover the cup and the tubing through which the cooling mixture flows.
Be certain that the tubing and cup are always covered with the insulating material. Make certain that the Model 35 operates properly with the insulated cup in place. Each unit uses 50/60 Hz. Make sure that the unit –115 or 230 VAC is rated for the power source.
For accurate temperature measurements, use a thermometer. You may order a thermometer separately. Fann offers three thermometers for use with this kit: Glass thermometer, degrees Fahrenheit, P/N 206040 Glass thermometer, degrees Celsius, P/N 206041 ...
Cold Water Rheology Instruction Manual Troubleshooting and Maintenance The following list includes basic care and cleaning instructions. Please refer to the bath manufacturer’s manual for comprehensive instructions. Clean and dry the bath according the manufacturer’s instructions. Properly clean the strainer and screen filter after use. ...
Returns For your protection, items being returned must be carefully packed to prevent damage in shipment and insured against possible damage or loss. Fann will not be responsible for damage resulting from careless or insufficient packing. Before returning items for any reason, authorization must be obtained from Fann Instrument Company.