Toto Aquia TS416A Installation And Owner's Manual page 6

INSTALLING MODEL TS626A:
1) Slide the escutcheon onto the shower
arm (see Illustration 1).
2) Wrap pipe tape around the threads
of the shower arm and fasten it to the
supply elbow (see Illustration 1).
3) Loosen the two set screws at the
bottom of the ball joint. Ensure
that the gasket is in place in the
showerhead, then thread the shower
arm onto the showerhead until it is
tight and secure it by tightening the
set screws (see Illustration 2).
4) Slide the escutcheon until it is flush
against the wall (see Illustration 3).
NO TE: Do not use the showerhead as
leverage to tighten the shower arm.
This can damage the showerhead.
INSTALLING MODEL TS630A:
1) Loosen the two (2) set screws in the
shower arm and remove the adapter
(see Illustration 1).
2) Slide escutcheon onto the shower
arm (see Illustration 1).
3) Wrap pipe tape around the threads
of the adapter and fasten it to the
supply elbow. Slide the shower arm
onto the adapter and secure it with
the set screws (see Illustration 1).
4) Thread the showerhead onto the
shower arm until it is tight (see
Illustration 1).
5) Slide the escutcheon until it is flush
against the wall (see Illustration 2).
NO TE: Do not use the showerhead as
leverage to tighten the shower arm.
This can damage the showerhead.
Installation Procedure (continued)
Illustration 1
Escutcheon
Illustration 2
Escutcheon
Set
Screw
Illustration 1
Set Screw
Filter &
Gasket
Illustration 2
6
Shower Arm
Washer
Showerhead
Set Screw
Pipe Tape
Set Screw
Escutcheon
Showerhead
Escutcheon
Pipe Tape