Cd/Mp3/Wma/Aac; Playback; Repeat Play - Alpine cda-9884 Owner's Manual

CD/MP3/WMA/AAC

Rotary encoder
SOURCE/
(OPEN)
/
VIEW
F/SETUP

Playback

1
(OPEN).
Press
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Close the front panel manually and the "DISC IN" indicator
light up.
When a disc is already inserted, press SOURCE/
switch to the DISC mode.
TUNER XM RADIO/SIRIUS*
4
BT AUDIO* CHANGER*
1
* Only when XM Radio or SIRIUS Radio is connected.
2
* Displayed only when the iPod is connected and AUX+ SETUP is set
to OFF, refer to "Setting the AUX+ SETUP Mode" (page 18).
3
* Displayed only when the AUX+ SETUP is set to ON, refer to "Setting
the AUX+ SETUP Mode" (page 18).
4
* Displayed only when BLUETOOTH IN is set to ADAPTE, refer to
"Setting the Bluetooth Connection" (page 17).
5
* Only when the CD changer is connected.
3
While playing back MP3/WMA/AAC, press
select the desired folder.
Pressing and holding
continuously.
4
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
/ENT
/ESC
4 5
to
1 2
DISC iPod* /AUX+*
5
TUNER
or
or will change folders
5
To pause playback, press
Pressing /
6
After pressing
press to eject the disc.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold
• The "DISC IN" indicator lights up when a disc is inserted.
• The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
• "MP3" is displayed during MP3 playback.
• "WMA" is displayed during WMA playback.
• "AAC" is displayed during AAC playback.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store and files that are copy-protected (copyright
protection) cannot be played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
Folder number
display
• Press VIEW to switch the display. See "Displaying the Text"
(page 15) for information about display switching.

Repeat Play

3
Press 4 to play back repeatedly the track being played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
: Only a track is repeatedly played back.
: A disc is repeatedly played back.
to
1
* When a CD changer is connected.
• If RPT is set to ON during M.I.X. play in CD changer mode, M.I.X.
will apply to the current disc only.
/ .
again will resume playback.
(OPEN) to open the front panel,
for at least 2 seconds.
101 103
File number
display
9
-EN