Basic Operation; Initial System Start-Up - Alpine CDA-7846E Owner's Manual

1
2
3
4
5
8

Basic Operation

Initial System Start-Up

When operating the unit for the first time after
installation or after the vehicle's battery has
been disconnected and reconnected, set the
volume level to its minimum, then remove the
detachable front panel. (Refer to page 7.)
Press the button with a ball-point pen or any
other pointed object. The plate opens
automatically.
There is a small hole at the lower right side.
Behind this hole the red Reset switch is located.
Press the Reset switch with a ball-point pen or
any other pointed object.
Push the plate to close it until a click sound is
produced.
Attach the front panel (see page 7).
English