ANALOG HOT PLATES, STIRRERS, AND STIRRING HOT PLATES
Congratulations on your purchase of a Cole-Parmer HS1, HS10, HS11, HP1, HP10, HP11, or ST1, ST10, ST11 Series unit. You will
find it easy to use and to maintain. Please read the instructions to insure that you receive the maximum benefit from it.
Cole-PArmer warrants this unit to be free from defects in material and workmanship for a period of one year from the date of
purchase. If repair or adjustment is necessary within the one year period, and has not been the result of abuse or misuse, please
return the unit, freight prepaid to us or the dealer from whom you purchased the unit, and correction will be made without charge.
Out of warranty products will be repaired on a charge basis. Be sure to fill in and return the warranty registration card.
Authorization must be obtained before returning items for any reason. When applying for authorization, please include data
regarding the reason the items are to be returned. For your protection, items must be carefully packed to prevent damage in
shipment and insured against possible damage or loss. Torrey Pines Scientific will not be liable for damage resulting from careless
or insufficient packing. A 15% restocking charge will be made on all unauthorized returns. Note: Torrey Pines Scientific reserves
the right to make improvements in design, construction and appearance without notice.
There are various labels on the body of these units. Listed below are the labels and their Meanings.
This symbol means: Attention. The instruction manual is to be
consulted for further information. Attention. Lire ce manuel pour des
This symbol means: Warning. Hot surface. Attention. Surface chaude.
This symbol means: Ground or earth connections. Connexion á la terre.
OPERATING INSTRUCTIONS
COLE-PARMER
Document Number HS10-03
Cole-Parmer Instrument Company
625 East Bunker Court
Vernon Hills, IL 60061
Telephone: 847-549-7600
Toll Free: 800-323-4340
Fax: 847-247-2929
E-mail: info@coleparmer.com
Web Site: www.coleparmer.com
I. Introduction
II. Warranty
III. Return of Items
IV. Labels and Symbols
informations complémentarie
Need help?
Do you have a question about the HS1 Series and is the answer not in the manual?
Questions and answers