WLBARGS Manual
1.3 Hardware Introduction
Front
1. Power LED (Green)
Indicate power status
2.Status LED (Red)
ON:Reboot/Hung up/FirmWare
upgrade
3. WAN LED (Green)
ON: Connected
Blink:Transmitting or receiving
data
4. Wireless LED (Green)
ON: Wireless function enable
Blink:Transmitting or receiving
data
5. LAN LED (Green)
ON: Connected
Blink: Transmitting or receiving
data
OFF: Disconnected
4 4 4
Back
Bottom
6. Detachable Antenna
Connector
7. LAN port(1-4)
Connected with PC
8. WAN port
Connected with modem
9. DC IN Socket
Connect with power
adapter
10. Initial Button
Press this buttom it will
reset to the default setting.
11. AP/Router Switch Button
Details please refer to
Chapter 7.
AP
R outer
11