Advertisement
hight to 1.2mm,and after that tighten srew1.
Screw 2
10、喂针的安装位置
10、Installation position of spreader
喂针高度是针板上平面到喂针下面的距离为H，调整喂针高度，松开螺钉1，上
下移动喂针（图13），使其高度为为H，H的具体取值如下表：
Spreader height H is the distance between needle
needle ,adjusting Spreader height, and loosing screw 1, then move
Spreader up or down(picture 13) to adjusting the height is H, the specific
references as follows:
标准
机型model
Screw 1
图12
picture12
标准行程（30.8mm）
Standards(30.8mm)
28 / 51
plate to
高行程（33.4mm）
Height(33.4)
Needle
plate
Advertisement
