Akasa integral HDD external enclosure for data-storage mobility with LAN sharing User Manual page 20

Using the INTEGRAL LAN Device
After the first installation, you can connect or disconnect the INTEGRAL LAN device without powering
off the computer, please follow the steps when you want to do the above actions.
Disconnecting the INTEGRAL LAN
WARNING!!
Do not unplug the USB.0 cable nor the power cable from the Integral Drive unit or break the communications with the
USB HUB while copying files to or from the device or when files or applications stored on the USB.0 External Drive are
being accessed. DOING THIS MAY RESULT IN LOSS OF DATA!
1.
Double-click on the [Unplug arrow icon or Eject
Hardware]
icon in the system tray. Dialog box
appears as on the right.
.
Highlight the [USB Mass Storage Device]
dialog box, click on [Stop], choose the USB.0
External Drive that you want to disconnect, then click
[Stop]
on again on next screen.
.
Wait for few seconds, the system prompts
may safely remove this
cable from the USB port of the computer.
20
in the
"You
device". Unplug the USB
USB Connection