Table of Contents
Advertisement
5.
After first time registration the "Found New
Hardware Wizard" may appear. Select "No, not
this time" and click Next to continue.
7.
Ifthe Windows Logo Testing message appears,
click Yes or Continue Anyway to continue the
installation.
11
4.
The Registration Wizard will check your NDAS
device status and detect your new INTEGRAL
LAN drive
(if
it has been connected and
switched on). Choose how you want to
mount the device and press Next.
•
Read/Write mode mounts device to read
and write.
•
Read Only mode mounts device to read
only.
•
Don't Mount: device is left not
connected.
NOTE:
If you haven't entered the KEY the
Write/Read mode is disabled.
6.
Select "Install the software automatically" and
click Next to continue.
Network Connection
Advertisement
Table of Contents
Need help?
Do you have a question about the integral HDD external enclosure for data-storage mobility with LAN sharing and is the answer not in the manual?
Questions and answers