Samsung DVD-V5450 Service Manual page 21

Reference Information
14-6 System Control and Mechanical Operations
14-6-1 Mechanical Operation
The operation of mechanism is performed by rotation of the loading motor, and the transmission path of the oper-
ation is as shown in Fig. 14-12.
Loading Motor
FL cam gear
Cam slider
Fig. 14-14 shows each mode and mechanism status in each mode concerned with the rotation of the FL cam gear
or cam slider shift. The mechanism operates as shown in Fig. 14-13 according to the timing chart in Fig. 14-14.
Note :
The Switch Detect is actuated by the rotational moving of Lever FL Arm-R and Switch on or off by insertion or
ejection of a cassette.
14-10
FL drive slider
Loading drive gear
Pinch drive lever
Tension drive lever
S brake
T brake
Up/Down lever
Fig. 14-12 Transmission Path of Operation
FL arm lever Cassette holder
Mode SW
No.9 guide
S, T slider
Pinch lever
Tension lever
Samsung Electronics