Advertisement
Installing the Side LED
Light
1. Secure the side light bracket to the platform
using 2 self-tapping hex washer-head bolts as
shown in
Figure
1. Platform
2. Side light bracket
2. Insert the hex-head bolt (5/16 x 3/4 inch) through
the LED light and side light bracket, and secure
it with the flange nut (5/16 inch) as shown in
Figure
6.
1. Flange nut (5/16 inch)
2. Hex-head bolt (5/16 x 3/4
inch)
5.
Figure 5
3. Self-tapping hex
washer-head bolt
Figure 6
3. Side light bracket
4. LED light
Install the Light Switch
1. Install the light switch bracket using the 2
self-tapping screws (#10 x 1/2 inch) as shown
in
Figure
g210264
1. Light switch bracket
2. Insert the rocker switch into the light switch
bracket
(Figure
3. Apply the light switch decal to the light switch
bracket
(Figure
g210263
1. Light switch bracket
2. Light switch decal
4. Connect the wire-harness connector to the back
of the rocker switch.
4
7.
Figure 7
2. Self-tapping screw (#10 x
1/2 inch)
8).
8).
Figure 8
3. Rocker switch
g210324
g210323
Advertisement
