Advertisement
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
No parts required
LED light
Front light bracket
Thread-forming screw (5/16 x 3/4
inch)—standard platform only
Hex-head bolt (5/16 x 3/4 inch)
Flange nut (5/16 inch)
LED light
Side light bracket
Self-tapping hex washer-head bolt (3/8 x 3/4
inch)
Hex-head bolt (5/16 x 3/4 inch)
Flange nut (5/16 inch)
Light switch bracket
Self-tapping screw (#10 x 1/2 inch)
Rocker switch
Light switch decal
Wire harness
Cable tie
Magnetic tie-wrap mount
No parts required
No parts required
No parts required
Preparing the Machine
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
-
position.
NEUTRAL
LOCK
4. Engage the parking brake.
5. Shut off the engine and remove the key.
Qty.
–
Prepare the machine.
1
1
2
Install the front LED light.
1
1
1
1
2
Install the side LED light.
1
1
1
2
Install the light switch.
1
1
1
6
Route the wire harness.
1
Route the wire harness overview (for machines with a
–
standard platform).
Route the wire harness overview (for machines with a
–
MyRide™ platform).
–
Test the lights.
2
Use
Advertisement
