Use Of Induction Hob - DeLonghi DSC 616-IND Installation & User's Instructions

3 - USE OF INDUCTION HOB

The ceramic hob is fitted with induction cooking zones.
These zones, shown by painted disks on the ceramic surface, are controlled by separate
knobs positioned on the control panel .
On the front of the hob, the displays for each cooking zone indicate:
=
=


=
÷
=
=
=
=
Note: each lit figure refers to the relevant cooking zone
INDUCTION COOKING SYSTEM
When your induction hob is switched on and a cooking zone has been selected, the
electronic circuits produce induced currents that instantaneously heat the bottom of the
pan which then transfers this heat to the food . Cooking takes place with hardly any energy
loss between the induction hob and the food .
Your induction hob operates only if a correct pan with the right features is placed on a
cooking zone . Please refer to "COOKWARE/COFFEE POT FOR INDUCTION COOKING" .
Cooking zone Off (not activated).
Cooking zone On (activated but not operating) .
If all the zones are in zero setting, the display switches off automatically
(cooking zones Off) after about 10 seconds.
Power levels .
"Booster" function .
Remaining heat indicator
Pan detection indicator
Indication that the knob needs to be reset (please refer to following
sections for specific instances).
23 23