Related Manuals for Bromic Heating FD4T1500H
Summary of Contents for Bromic Heating FD4T1500H
- Page 1 FOOD DISPLAY WARM&AMBIENT 3736300, 3736301, 3736302, 3736303 3736304, 3736305, 3736306, 3736307 10/12/2018 - V1...
-
Page 2: Table Of Contents
CONTENTS 1. PREFIX 2. IMPORTANT NOTES & WARNINGS 3. PRODUCT OVERVIEW 4. INSTALLATION 5. OPERATION 6. PRODUCT LOADING AND STORAGE 7. MAINTENANCE 8. TROUBLESHOOTING 9. ENVIRONMENTAL & DISPOSAL NOTES 10. WARRANTY Note: Bromic Refrigeration reserves the right to make changes to specifications, parts, components and equipment without prior notification. This Installation, operation and service manual may not be reproduced in any form with prior written consent from Bromic Refrigeration. -
Page 3: Prefix
1. PREFIX This manual contains important information about the installation, operation, and maintenance of Bromic Food Display units. Please pay close attention to the important safety information shown throughout this instruction manual. Any safety information will be accompanied by the following safety alert symbols: DANGER, WARNING,... -
Page 4: Important Notes & Warnings
2. IMPORTANT NOTES AND WARNINGS • Read all instructions before installing or using this appliance • Retain this manual for future reference • Use this appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury. •... -
Page 5: Product Overview
3. PRODUCT OVERVIEW WARM SHOWCASE FD4T0900H FD4T1200H FD4T1500H FD4T1800H Part Number 3736304 3736305 3736306 3736307 Height, mm 1360 1360 1360 1360 External Dimension Width, mm 1200 1500 1800 Depth, mm Capacity Litres Weight Air Circulation Forced Forced Forced Forced Range 50°C to 70°C... -
Page 6: Installation
4. INSTALLATION Locating the Cabinet Ensure the following instructions are observed as this is vital for proper and trouble-free operation. • Do not install the cabinet outdoors. • Locate the appliance in a dry and well ventilated place. • The unit must be positioned on a level surface. •... -
Page 7: Operation
5. OPERATION Start-up • Connect the appliance to the mains power supply and turn on the main switch (blue) by flipping it upward. • Switch on the Heating (for Warm showcase) and Lighting switches, and check that the fan (for Warm showcase) and lighting are working correctly. •... -
Page 8: Product Loading And Storage
6. PRODUCT LOADING AND STORAGE IMPORTANT: Run the appliance for at least 1 hours before loading. WARNING: WARNING: Never store explosive substances such as aerosol cans with a flammable propellant inside the appliance. Start-up • Clean the interior surface with a soft cloth and warm water before loading. •... -
Page 9: Troubleshooting
8. TROUBLESHOOTING IMPORTANT: Repairs on the unit must be carried out by an authorised and licenced person only. Contact the manufacturer or an approved service agent for any repairs needed. Symptom Possible Cause(s) Unit does not work A. No power supply A. -
Page 10: Environmental & Disposal Notes
9. ENVIRONMENTAL AND DISPOSAL NOTES The device must be disposed of in accordance with applicable regulations. The WEEE regulations must be observed. In the interest of preventing environmental nuisance and promoting re-use of the high quality materials employed, used commercial equipment must be collected for expert disposal and recycling. -
Page 11: Warranty
10. WARRANTY Please visit our webpage for warranty details – (http://www.bromic.com/warranty-information/) Read all relevant documentations before operating the appliance and storage of any stock. Failure to follow instructions may result in loss of or damage to stock. BROMIC CANNOT BE RESPONSIBLE FOR THE LOSS OF OR DAMAGE TO STOCK 1300 276 642 www.bromic.com/refrigeration... - Page 12 SYDNEY HEAD OFFICE & SHOWROOM 10 Phiney Place, Ingleburn NSW 2565 Australia T: AU 1300 276 642 F: (+61) 1300 735 115 E: refrigeration@bromic.com.au NSW VIC QLD TAS WA SA NT ACT BROMIC.COM...