Advertisement
IMPORTANT
(English)
WARNING
The purchaser must check the integrity of the product before installing, reporting to the authorized seller possible fault or non
compliance: Not doing the aforementioned check or report it can cause the immediate decline of the guarantee.
During transport and installation handle the product with care.
It is forbidden to waste or leave the packaging material ( plastic bags, screws and other bits and pieces) to the reach of children
because they are source of danger. For the disposal of the product and of its components please refer to the local rules in themes of
waste disposal. For the assistance of the installation, request of spare parts or original accessories, please contact the authorized seller.
CARE AND MAINTENANCE
All the parts that compose the product must be clean by mean of a soft cloth slightly dumped with neutral base mild detergent. Do not
use detergent that are particular aggressive: the use of such product could cause the opacify of the chrome or varnish finish. Do not
use steam jet: the jointing in plastic material can undergo to very much thermic shock that could cause the immediate shattering of
the elements. The AQVACLEAN treatment is made on inside and outside surface of the glass : For the cleaning of the surface is
recommended a soft cloth slightly damped with water. When the treatment is fading away is available <the restoration AQVACLEAN
treatment kit> (Available to Authorized sellers).
It is forbidden the use of abrasive soap or cloth ( ei. Scoth-bride), solvent or other aggressive chemical substance.
WARRANTY
The manufacturer guaranties its product from manufacturing defects for 24 months , starting from the date of purchasing proved by
the receipt or fiscal slip.
The guarantee is valid only if the conformity declared are referable to defects of manufacturing and have been acknowledged by
the manufacturer. An installation that does not follow up the steps reported in the present installation manual, cause the immediate
expiry of the guarantee.
Are not included in the guarantee the parts that are subject to normal wear and tear and /or components that results faulty or
damaged due to accidental damage for negligence or inadequate care, for use and incorrect or improper installation, and from
subsequently handling or changes made from unauthorized personnel of the manufacturer and / or to the exposition to corrosive and
/or abrasive agents.
The manufacturer declines from any responsibility to damages towards persons, animals or things caused from mistakes of
installation, adjustment or to incorrect use or lack observance of all the regulation contained in the present manual of use and
maintenance that accompany the product.
CHANGES
The constant obligation in the research and in the improving of our products, could generate changes to the technical specification
and to the aesthetic and measures characteristics.
Advertisement
