AeroGarden 100633 Quick Start Manual page 14

Basic Reminders About Your AeroGarden
(optional) Trellis System
About the Trellis System
Your AeroGarden 6 Elite + has the option of connecting a Trellis System to its Lamp Hood. The Trellis System
allows you to easily support heavy, fruit-filled branches on full-size plants such as tomatoes, peppers and cucumbers.
If you are interested in purchasing an AeroGarden Trellis System, you may do so at www.aerogardensupport.com or
from your retailer.
Trellis System installation
If your AeroGarden 6 Elite + is already assembled, you will need to remove the lamp Hood from lamp Arm, and
remove Grow Bulbs from the lamp Hood before starting. It is best to do this when Garden lights are off.
1
Unplug AeroGarden 6 Elite + and carefully remove Lamp Hood from Lamp Arm.
2
Turn Lamp Hood over and remove Grow Bulbs.
3
Attach Trellis Brackets to lamp Hood
4
Insert Grow Bulbs into Lamp Hood.
5
Replace Lamp Hood on Lamp Arm and plug in AeroGarden 6 Elite + .
Use Trellis System
1
Clip Trellis Coil on Bracket.
lamp Hood
Bracket
Trellis coil
As a safety precaution, unplug AeroGarden furnishing
before performing this task. Be sure Grow Bulbs are cool
to the touch before attaching or adjusting Trellis Coil.
13
(not included)
Hand tighten pre-mounted screws
with phillips head screwdriver. Do
not over-tighten.
2
Pull down Trellis Coil.
(Be sure bulbs are cool before handling.)
3
4
Gently push up on supported branch
until it is at desired height.
(continued)
Wrap Strap around branch that
needs support and snap closed.