Personalize Your Light Timer - AeroGarden 100629 Quick Start Manual

Personalize Your Light Timer

Your AeroGarden has lights and a built-in timer that automatically provide plants with the optimal amount of "sunlight"
(about 16 hours) and "night" (about 8 hours), depending on the plant type selected in the previous section.
As long as plants get this amount of light, it does not matter when the lights are turned off. * Many people find it con-
venient to have the lights go on in the morning and off at night to match their own wake and sleep schedule.
*
The exceptions to this are Flower, Tomato & Pepper plants. They require a daily dark period in order to produce flowers. If your plants will receive
any room light during the day (natural or artificial), we recommend that you set your AeroGarden lights to be on during the day.
5 Simple Steps...
In order to make this as simple as possible, you only
need to set the time you want your AeroGarden
do the following to set the time you want your lights to go off:
1
Decide what time of day you want the lights to go OFF.
2 AT THAT TIME check that lights are on. If they are off, quickly press "Lights" button and
immediately release. (Lights must be on in order to reset timer.)
3
With lights on, press and hold "Lights" button until the green light next to the plant type
you selected starts blinking – about 5 seconds.
4
Release the button.
5
When blinking stops (about 9 seconds), the lights will go off.
Your lights are now set to go off at this time every day.
Lights Button
If light from your AeroGarden is visible from
your bedroom, you may want to set the lights to
go off about the time you usually go to bed, so
as not to disturb your sleep.
9
Now, each day, your AeroGarden lights will automatically
• Turn Off at the time you set using the above steps
• Remain off for about 8 hours
• Turn on for about 16 hours
You can reset your timer as often as you want.
(optional)
lights to go off (Off Time), and your built-in light
timer automatically sets the On Time...nothing
more for you to do.
Blinking Light
In case of power failure, your AeroGarden has a backup
system that stores your light & nutrient timers and plant
selection settings. When power is restored, your AeroGarden
will go back to the off-on cycle you have set.
(if you selected Salad Greens)