Maintenance & Troubleshooting - Vax Rapide Instruction Manual

Hide thumbs Also See for Rapide:
Table of Contents

Advertisement

V-026 Series User Guide.qxd:V-026
Separate the foam filter from the float (Fig.6/2).
Fig.6/2
Rinse the filter in water (40°C max) (Fig.6/3).
Fig.6/3
Allow the filter to air dry completely before storing your
machine (Fig.6/4).
Fig.6/4
26/3/10
All manuals and user guides at all-guides.com
24hr
15:45
Page 11
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
6. Troubleshooting
WARNING: To reduce the risk of personal injury,
!
unplug the vacuum cleaner before performing
maintenance or troubleshooting checks.
PROBLEM: The cleaner won't run.
Cause:
Not properly plugged into electrical outlet.
Solution: Plug in firmly.
Cause:
No electricity in electrical outlet.
Solution: Check fuse or breaker.
Cause:
On/off switch not turned on.
Solution: Push on/off switch to 'on' .
Cause:
Blown fuse/tripped breaker.
Solution: Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won't pick up/loss of suction.
Cause:
Dirty water tank is full.
Solution:
Switch off and unplug cleaner. Empty dirty
water tank as shown in Section 4.
Cause:
Dirty water tank not installed correctly.
Solution:
Refer to page 9 for fitting information.
Cause:
Obstruction in hose/wash tool
Solution:
Remove hose and clear obstruction.
Cause:
Broken or worn belt.
Solution:
Replace the belt. See page 10.
Cause:
Brushbar is worn.
Solution:
Replace the brushbar. See page 10.
PROBLEM: Dust escaping from the vacuum.
Cause:
Dirty water tank is full.
Solution:
Switch off and unplug cleaner. Empty dirty
water tank as shown in Section 4.
Cause:
Dirty water tank not installed correctly.
Solution:
Refer to page 9 for fitting information.
Cause:
Solution tank not installed correctly.
Solution:
Make sure the tank is securely locked in place
PROBLEM: Clean water/solution won't dispense.
Cause:
Clean water tank not installed correctly.
Solution:
Make sure the tank is securely locked in place.
Cause:
Clean water tank tank empty.
Solution:
Refill tank. Refer to page 6 for instructions.
maintenance / troubleshooting
11

Advertisement

Table of Contents
loading

Table of Contents