Table of Contents
Advertisement
multiple cities and you are not sure of which city is appropriate for the street.
If you know the street address or cross streets of your destination, use the
"Address/Intersection" selection. You must select the State/Province where the
destination is located. NOTE: The system remembers the last State/Province
selected, so this step is not necessary every time.
Intersection icon - This icon will appear after the first street and city is
•
entered. When the icon appears, press the icon and select the Intersection Cross
Street.
Destination Selection (Go To...)
Postal/City/Street/Intersection:
You may select either the Postal code or
City Name or the Street Name first.
NOTE: When the icon is pressed, the
icon will change to the next category
(Postal, City, or Street)
•
Postal Code icon – If you know
the postal code, select this option to
quickly find the city. NOTE: The postal
code search is limited to the currently
selected State/Province. Postal code
searching may not be available in
all areas.
City Name icon - If you know
•
the city and street, select this option.
You could use the "Street Name"
option instead, but it is quicker and
easier to use the "City Name" op-
tion when you know both parts of
the address. If you selected the "City
Name" option, continue by following
the prompts on the display screen to
select a city first, then street, then ad-
dress number of the intersection.
If you selected the "Street Name" op-
tion, follow the prompt to select
a street name, then a city, then a
street address or intersection
Street Name icon - If you know
•
the street name but you are not sure
of the city, select this option. You
might use this option, for example, if
you were in a large metropolitan area
and a street continues through
15
Advertisement
Table of Contents
