Advertisement
Assembly instructions (continued)
3.
Assemble the arm assembly and
handle
□ Pull the excess power cord through
the base (I).
□ Screw the arm assembly (D) to top
of the upper pole (F).
□ Screw the handle (E) to arm assembly (D).
IMPORTANT NOTE: Please make sure the
arm and socket face front as shown, if the
arm and socket are not face front, adjust the
arm and socket face front as shown, and then
use the wrench (J) (included) to tighten the
nut from bottom of the base (I).
4.
Assemble the metal shade
□ Remove the socket ring (B) from sockets by
unscrewing the socket ring (B).
□ Place one metal shade (D) over socket, then
secure with the socket ring (B).
D
I
Socket
C
B
Arm
E
F
J
5
Advertisement
