Table of Contents Safety Information ............................2 Pre-Installation ............................3 Planning Installation ..........................3 Package Contents ..........................3 Assembly ..............................4, 5, 6 Care and Cleaning ............................7 Troubleshooting ............................7 Safety Information □ Consult a qualified electrician with any electrical questions you may have. IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping.
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This lamp requires the use of one 120V, 60Hz, 100-Watt max, medium-base type A bulb (not included).
Page 4
Assembly instructions Unpack the lamp and assemble pole □ Carefully organize and place all parts on a smooth, flat surface. line up all of the parts according to the assembly diagram. □ Screw the pole (D) to bottom of the arm assembly (A).
Page 5
Assembly instructions (continued) Remove the socket ring □ Remove the socket ring (C) from the Socket socket by unscrewing the socket ring (C). Assemble the shade □ Place the shade (B) over the socket, Socket then secure with socket ring (C).
Page 6
Assembly instructions (continued) Install the bulb □ Prior to installing the bulb, inspect socket for silica packet. If packet is present, then remove and throw away. Do not expose it to children or pets. □ Install the 120V, 60HZ, 100-watt max. medium-base type A bulb (not included) into the socket of the light lamp.
Important safety instructions □ This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.