Table of Contents
Advertisement
Energy-Saving Operation
22 English
Single user function
Use the Single user function to reduce electricity consumption
while staying cool or warm. You can select this function in the
Cool and Heat modes.
In the Cool or Heat mode
NOTE
• When the Single user function starts, the
appears on the remote control for a few seconds, and
vertical air swing begins automatically.
• If you select the Single user while such function as 2-Step
cooling, Fast, Comfort, Quiet, or good'sleep are running,
these modes are cancelled.
• After selecting the Single user function, you can change
the set temperature (24 °C to 30 °C in the Cool mode, 16 °C
to 30 °C in the Heat mode), fan speed, and vertical air flow
direction.
• When the Single user function is turned on in the Cool
mode while the set temperature is set to lower than 24 °C,
the set temperature is automatically raised to 24 °C. But if
the set temperature is set to between 25 °C and 30 °C, it
remains the same.
• Even after you turn off the Single user function, vertical
air swing continues until you turn it off with the Vertical
air swing (
) button.
• You can also start the Single user function by pressing the
Options (
) button.
In the Cool or Heat mode
Select Single user.
►
►
►
►
pattern
►
Advertisement
Table of Contents
