ZyXEL Communications ZyAIR B-220 Quick Installation Manual page 10

Wireless lan usb stick
Hide thumbs Also See for ZyAIR B-220:
Table of Contents

Advertisement

PROBLEM
I cannot start the
Wireless LAN
Utility.
The Wireless LAN
Utility displays
only three tabs.
Use the Device Manager window to check for possible
hardware conflicts.
Click Start, Settings, Control Panel, System, Hardware and
then click Device Manager. Verify the status of the USB Stick
under Network Adapter. (Steps may vary depending on the
version of Windows).
Install the USB Stick in another computer.
If the error persists, you may have a hardware problem. In this
case, you should contact your local vendor.
Make sure the USB Stick is properly inserted and the LED
blinks.
Use Device Manager to check for possible hardware conflicts.
Click Start, Settings, Control Panel, System, Hardware and
then click Device Manager. Verify the status of the USB Stick
under Network Adapter. (Steps may vary depending on the
version of Windows).
Install the USB Stick in another computer.
If the error persists, you may have a hardware problem. In this
case, you should contact your local vendor.
When the WLAN Utility displays only three tabs, you are using
the Windows XP configuration tool at the same time. Refer to
the Disable Windows XP Configuration Tool section to disable
the Windows XP wireless configuration tool.
CORRECTIVE ACTION
10

Advertisement

Table of Contents
loading

Table of Contents