Powering On/Off The Projector; Powering On The Projector - Acer PD523P series Manual

Turn on the projector

first and then the signal
sources.

Powering On/Off the Projector

Powering On the Projector

1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will flash red.
3. Turn on the lamp by pressing "Power/Standby" button on
the control panel.  And the Power LED will turn blue.
4. Turn on your source (computer, notebook, video player
,etc.). The projector will detect your source automatically.
If the screen displays "Lock" & "Source" icons, it means the pro-

jector locks on this source type and there is no such type of input
signal found
If the screen displays "No Signal", please make sure the signal

cables are securely connected.
If you connect multiple sources at the same time, using the

"Source" button on the remote control or control panel to
switch.
Installation
Power/Standby
1
13
... English