S T A N D A R D C M O S F E A T U R E - Acer Veriton M265 Service Manual

Standard CMOS Features
Select standard CMOS features from the main menu to configure some basic
parameters in your system the following screen shows the standard CMOS
features menu:
The following table describes the parameters found in this menu.
Parameter
System Date
System Time
Primary IDE Master/Slave
Secondary IDE Master/Slave
Third IDE Master/Slave
IDE BusMaster
Drive A
Description
Set the date following the weekday-month-day-year format.
Set the system time following the hour-minute-second format.
Allows you to configure the hard disk drive connected to the master port of
IDE channel. To enter the IDE Master or Slave setup, press [Enter]. The IDE
CD-ROM is always automatically detected.
When enabled, BIOS uses PCI bus-mastering for
reading/writing to IDE drives.
The category identifies the types of floppy disk drive A
that has been installed in the computer..
Options
Enabled
Disabled
Disabled
720 KB 3.5 inch
1.44 MB 3.5 inch
2.88 MB 3.5 inch
Not Detected
21