Video System Remote Control - PREVOST XL Series Instruction Manual

Motorcoach

Hide thumbs Also See for XL Series:

Manual (51 pages)

Table of Contents

2. Depress accelerator pedal until the desired

speed is obtained, then press and release the

"SET" switch.

NOTE: When driving with cruise control in use,

the speed may be increased for passing, etc., by

depressing the accelerator in the usual manner.

Once the foot is removed from the accelerator

pedal, the cruise control will return to the set

speed.

Decreasing set speed

Vehicle speed setting may be decreased by one

of the following methods:

Press and hold the "SET" switch until the

desired lower speed is obtained. Releasing the

"SET" switch will set the new speed.

2. The cruise control can be disengaged without

losing the speed memory by either of two

methods:

a) Lightly applying the brakes, or

b) momentarily depressing the "DECEL" switch

button.

After either of these disengagements, you may

return to the previously set speed by pressing and

releasing the "RESUME" switch, provided the

speed is higher than 20 m.p.h. (32 km/h).

The cruise control is completely shut off and the

speed memory is lost when turning off the

"CRUISE" rocker switch.

NOTE: Cruise control is inoperative when speed

drops below 20 m.p.h. (32 km/h), therefore the

setting instructions must be repeated if vehicle

speed drops below this mark.

When the cruise control system is cancelled,

objectionable vehicle motions are minimized by

lightly depressing accelerator, before disengaging

cruise control.

WARNING: It is important to know that toggling

the "SET" or the "RESUME" switches will result in

a decrease or increase in speed (respectively) of

1 m.p.h. (0,6 km/h) for every touch.