Port Identification - Garmin Fusion Apollo MS-WB670 Installation Instructions Manual

Port Identification

Item Description
Connects the stereo to the wiring harness for zone 3.
Connects the stereo to the wiring harness for auxiliary input 1, and for the line and
subwoofer outputs for zones 1 and 2.
Connects the stereo to the power and speaker wiring harness.
FUSE Contains the 15 A fuse for the device.
USB Connects the stereo to a USB source.
Connects the stereo to a SiriusXM
available (not included).
SXM TUNER
Connects to a Fusion DAB module to receive DAB stations where available (not included).
DIGITAL AUDIO IN
Connects the stereo to an optical digital audio source, such as TV or DVD player.
(OPTICAL)
Connects the stereo to another Fusion PartyBus stereo, zone stereo, or network
ETHERNET
PartyBus Networking, page
Connects the stereo to a typical AM/FM antenna.
If you are installing the stereo on a boat with a metal hull, you must use a ground-
ANTENNA
dependent antenna. If you are installing the stereo on a boat with a non-metal hull, you
must use a ground-independent antenna. See the installation instructions provided with
your antenna for more information.
Connects the stereo to a NMEA 2000 network
NMEA 2000
page
Apollo MS-WB670 Installation Instructions
12).
11).
® Connect Tuner to receive SiriusXM stations where
(NMEA 2000 System Wiring Diagram,
(Fusion
3