Page 1
MODEL No: GR-SHP4L 4 Ft. LED Linkable Grow Strip Light PACKAGE CONTENTS 46.5 in. 1.75 in. SIDE 1.5 in. 5 ft. 18/3 SVT Cord Snap on track for mounting clips Grounded linking outlet LED Facts: FRPF (700-800nm): 5.21 PPF (400-700nm): 48.09 Blue PF (400-500nm): 7.8...
Page 2
WARNINGS WARNING: TO AVOID ELECTRIC SHOCK, CAUTION: Personal injury can occur, along with damage to the fixture and/or mounting surface may result if the fixture is DISCONNECT POWER BEFORE INSTALLING pulled from the surface. To prevent premature failure from over- heating, fixture should only be installed in environments where the WARNING: This product may represent a possible shock or fire hazard operating temperatures are between -4°...
Page 3
INSTALLATION INSTRUCTIONS Before installation, cut off power to the electrical outlet. 1. Install the mounting clip with cable to the top side of the fixture along the mounting track that the runs most of the length of the fixture (Fig. 2). Lower the clip onto the track.
Page 4
LINKING ADDITIONAL UNITS This fixture can be linked with #GR-SHP2L and #GR-SHP4L fixtures and up to a maximum of 288 total watts. 1. To link additional lights, unplug the first fixture the additional light will link to. Repeat Step 1 for the additional fixtures. A maximum lights connected on one string of lights MUST NOT EXCEED A TOTAL OF 2A.
Need help?
Do you have a question about the GR-SHP4L and is the answer not in the manual?
Questions and answers