YILMAZ SKN 301 User Manual page 57


The screen, shown above, appears.

Recipe is displayed on the screen by using
recipe section.

After displaying the recipe on the screen, press on start button and position the machine at the desired location.

After the desired amount of pieces is cut, press on
transition between recipes are defined, when cutting operation completed, machine waits for the duration entered in
the screen and proceed to next recipe, and position itself to required location.
o
Automatic transition mode is set in calibration page, as following.
o
Open main screen.
and buttons. How to create recipe is described in creating
button in order to proceed to next recipe. If automatic
57