Table of Contents
Advertisement
Open
Authentication
Shared
Authentication
Auto
Key Length
Key Format
Default Key
1
2
3
4
If the Access Point is using
"Open Authentication", then the
wireless adapter will need to be
set to the same authentication
mode.
Shared Authentication is when
both the sender and the recipient
share a secret key.
Select Auto for the network
adapter
to
Authentication
automatically depending on the
Access
Point
Authentication
mode.
64 Bit or 128 Bit.
Select HEX if you are using
hexadecimal numbers (0-9, or
A-F).
Select ASCII if you are using
ASCII
(case-sensitive).
Ten hexadecimal digits
ASCII characters
if
64-bit WEP
hexadecimal digits
characters
are needed if
WEP
is used.
This setting is the configuration
key
used
in
accessing
wireless
network
encryption.
Select one default key then fill in
the appropriate value/phrase in
Network Key field. (Please refer
to the Key Format description
for
the
limitations
Network Key.)
Note: You must
-
14 -
select
the
mode
characters
or
five
are needed
is used;
26
or
13 ASCII
128-bit
the
via
WEP
on
the
Advertisement
Table of Contents
