Table of Contents
Advertisement
Item
Description
share the same radio channel in order to
function properly.
enabled only in
(There
depending on the country.)
Tx Rate
Select (1, 2, 5.5, or 11Mbps or Auto)
from the pull-down list to change the
current transfer rate.
Preamble
A preamble is a signal used in wireless
environment
transmitting
Synchronization
delimiter. (Note: If you want to change
the Preamble type into Long or Short,
please check the setting of AP. Some
Access Points do not support Auto
Preamble.)
Auto
Select Auto for the Network adapter to
select the Preamble type automatically
depending on the Access Point Preamble
type.
Long
In a "noisy" network environment, the
Preamble
Preamble Type should be set to Long
Preamble.
Short
The Short Preamble is intended for
Preamble
applications where minimum overhead
and maximum performance is desired. In
a "noisy" network environment, the
performance will be decreased, if Short
Preamble is used.
Radio
Select On/Off from the pull-down list to
enable/disable
function of the Wireless Network
Adapter.
Channel button is
Peer-to-Peer
are
14
channels
to
synchronize
timing
and
Start
the
Radio
-
12 -
mode.
available,
the
including
frame
Module
Advertisement
Table of Contents
