Download Print this page
SEASIDE CASUAL FURNITURE ENVIRO WOOD Westport Bistro Tables Quick Start Manual

SEASIDE CASUAL FURNITURE ENVIRO WOOD Westport Bistro Tables Quick Start Manual

Advertisement

Quick Links

Instruction Revision: D
S
(34, 41, 66, 69) 36" Westport Bistro Tables
(1) Table Top
(1) Leg Assem-
bly 1
(1) Leg Assem-
bly 2
(1) Foot Rest
(66 & 69 Only)
(1) Umbrella
Base Cup
READ ALL INSTRUCTION BEFORE BEGINNING!Carefully remove contents from box.
Make sure that all parts and hardware are included. Assembly of Table may require two people.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
C
EASIDE
ASUAL
ENVIRO
(34, 66, 69 rev. A) (41 rev. B)
Assembly Instructions
Step One: Set Up
Step Two: Leg Assembly
Align the notches in the feet with one another,
may need to be manipulated (Left Picture).
For (66 & 69 Only): Insert Foot Rest in be-
tween the leg assemblies, aligning the notches
in the foot rest with notches in the legs. Make
sure the pockets are facing the feet do not se-
cure at this time (Right Picture).
Step Three: Attaching Leg Assembly
Place Table Top upside down on a clean flat
surface, may use bubble wrap. Flip Base As-
sembly over and align the aluminum in the
notches under the table top, aligning the short
aluminum in the notches under the table top.
Secure using (12) 3/4" pan head screws (Left
Picture).
(66 & 69 Only) Secure foot rest to the legs with
(4) 1-1/2" pan head screws (Right Picture) .
F
URNITURE
WOOD
1
Hardware:
(12) 3/4" Pan Head Screws
(1) Umbrella Reducer
The Following is for
(34,66 Only)
(1) 1-1/4" Phillip's Head Screw
(2) Thumb Screws
The Following is for (66 & 69
Only)
(4) 1-1/2" Pan Head Screws
Tools Required:
Phillip's Head Screwdriver
4MM Allen Wrench (Included)

Advertisement

loading

Summary of Contents for SEASIDE CASUAL FURNITURE ENVIRO WOOD Westport Bistro Tables

  • Page 1 Instruction Revision: D EASIDE ASUAL URNITURE ENVIRO WOOD (34, 41, 66, 69) 36” Westport Bistro Tables (34, 66, 69 rev. A) (41 rev. B) Hardware: (1) Table Top (12) 3/4” Pan Head Screws (1) Umbrella Reducer (1) Leg Assem- The Following is for bly 1 (34,66 Only) (1) 1-1/4”...
  • Page 2 Step Four: Umbrella Accessories If Needed (34, 66, 69 Only) Turn assembled table Use Umbrella Reducer to standing position. for 1 to 1-1/2” Um- Place Base Cup in brella Poles. (Right center of Feet Inter- Picture) section facing up. At- tach using 1-1/4”...