Changing The Blade; Care And Cleaning - KitchenAid 5KSMSIA Owner's Manual

PRODUCT USAGE (CONTINUED)
4.
Release the top lever by gently rotating it to the right. The spring will engage as the Ice
Pusher clamps down on the ice puck. The Shave Ice Attachment is properly loaded and
ready to use.
SHAVING ICE
1.
Place a serving dish of your choice beneath the Shave Ice Attachment. Do this before
starting the mixer.
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
2.
Plug the Stand Mixer into an earthed outlet Set the mixer to the highest speed to begin
shaving.
NOTE: For best results, consider rotating the dish as the ice shaves to create a more
even, cone-shaped mound of ice.
3.
Once shaving is complete, turn off the mixer and return the upper lever to the leftmost
locked position.
4.
Remove the Ice Cup from the housing by rotating it to the right and pulling downward.
Discard any remaining ice.
5.
Finish your Shave Ice dessert with a variety of flavourings or toppings of your choice.
Refer to Online Product Guide for additional tips, tricks, and recipes to help make the most of
your Shave Ice experience.
For even more recipes and inspiration, visit KitchenAid.com.

CHANGING THE BLADE

1.
Grip the blade from the bottom and rotate to the right to remove, or to the left to install.
Once inserted, rotate the blade to the left until you hear a "Click", to properly lock the blade
in place.
2.
Each of the interlocking tabs is unique size, ensuring the blade can only be installed in the
correct position.

CARE AND CLEANING

IMPORTANT: Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
NOTE: Disassemble the unit properly before cleaning. For instructions, refer to the SET UP &
ASSEMBLY section steps 7, 8, and optional.
6
WARNING
Electrical Shock Hazard