Page 1
FLUX Multifunctional Flood Light 6W 20W Installation Manual SOLTECH Provides Advanced LED Technology Powered With Eco-friendly, Clean, Solar Energy.
Page 2
Important Notice & Warning Please read these instructions before installation to ensure optimum results 1. The FLUX will provide optimal usage where there is LED Nominal Power and longevity of your lights. The solar panel should be charged in full enough sunshine.
3. Drill two holes into the wall surface. Attach the bracket to surface, then screw in the wall the fixture then secure to the mount base to the wall. FLUX 6W FLUX 20W wall surface with the screw kit. 01. Fixture 03. Pole Mount 01.
Page 4
04 Remote Control MOTION SENSOR MODES Light on 100% if motion is detected, stand-by period is Light on 100% if motion is detected, stand-by period is 60 Light on 50% for 3 hours (Sensor disabled), then returns to 60 seconds. Light will turn off when no motion is detected. seconds.
Page 5
05 Panel Angle 70° N 69° N 68° N 67° N The solar charge in a battery pack won’t last forever. The off–grid system 66° N relies on stored solar energy for autonomy. Angling your solar panels 65° N properly can boost the power intake of your solar lighting system. You want to angle your solar panels at a tilt based on the area’s latitude.
Page 6
06 IES Light Distribution 07 Warranty FLUX 6W FLUX is covered by a 3 year limited warranty. SOLTECH urban light warrants to the original purchaser that this Lamp=1 097.4 lm Type B Max=430.1 cd product is free from defects in materials and workmanship Power=6 W Multiplier=1.0974...
Need help?
Do you have a question about the FLUX and is the answer not in the manual?
Questions and answers