Table of Contents
Advertisement
LBXXXA Series USB PowerSensor+™
Product Manual PMA (Power Meter Application)
GUI Functions
The Menu Bar
The menu map below shows all the submenus for each functional heading. We have covered many of these functions
in section 3. Basic Operating Instructions. Menus provide the configuration setups related to each functional heading
and are directly linked to the toolbar buttons. The current sensor configuration is indicated by a check mark next to the
menu item. The highlighted setups (Logger, Extended Averaging, Limits, Offset, Response, Duty Cycle, Trigger Out,
Recorder) must be enabled for functionality from either the menu or the toolbar. Since most menu functions are also
accessible from the toolbar we will proceed directly to an explanation of the toolbar buttons.
The Store/Recall and Help menus are not included on the toolbar. There are 20 Store/Recall registers and each
register holds an entire state. However, the states are not held in the instrument but reside on the local PC in a basic
text file. The files are named by model number and address and are retained in the Ladybug application directory.
This means that saved states can be saved, copied or moved between PCs. Refer to the product Programming Guide
for more information. The Help directory contains product documentation.
Revision: 08/02/11
- 26 -
Advertisement
Table of Contents
