LBXXXA Series USB PowerSensor+™
Product Manual PMA (Power Meter Application)
Configuring the Sensor
Measurement Update Rate
The measurement rate can be adjusted by selecting Meas Update Rate from the Measurement menu as shown
below. Other items on the Measurement menu are explained in the GUI Functions section of this document. The
application will take longer to respond to mouse clicks and data entry as the measurement rate is increased.
Addressing the Sensor
The Set Address facility allows the address of the sensor(s) to be assigned from 1 to 255. Changing the address
requires an automatic re-start of the application. You will see the following sequence of windows when changing the
address by selecting Set Address from the Measurement menu. Follow the instructions as stated to change the
address and to disconnect and reconnect the sensor.
Change address Screen #1
Change address Screen #2
Change address Screen #3
Revision: 08/02/11
- 11 -