Table Of Contents - Samsung HZ50W User Manual

Caution
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.
Leaking, overheating, or damaged battery could result in fi re or injury.
- Use battery with the correct specifi cation for the camera.
- Do not short circuit, heat or dispose of battery in fi re.
- Do not insert the battery with the polarities reversed.
Remove the battery when not planning to use the camera for a
long period of time. Otherwise the battery may leak corrosive
electrolyte and permanently damage the camera's components.
Do not fi re the fl ash while it is in contact with hands or objects. Do
not touch the fl ash after using it continuously. It may cause burns.
Do not move the camera while it is switched on, if you are using
the AC adapter. After use, always switch off the camera before
unplugging the cable from the wall socket. Then make sure that
any connector cords or cables to other devices are disconnected
before moving the camera. Failure to do so may damage the cords
or cables and cause a fi re or electric shock.
Take care not to touch the lens or lens cover to avoid taking an
unclear image and possibly causing camera malfunction.
Avoid obstructing the lens or the fl ash when you capture an image.
When using this camera in low temperatures, you may experience
the following. These are not camera malfunctions and usually
recover at normal temperature.
- It takes longer to turn on the LCD monitor and the color may differ
from the subject.
- When changing the composition, there may be an after image on
the LCD monitor.
Credit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
Never connect the 20 pin connector to the USB port of a PC. This
carries a high risk of computer malfunction.
Contents
007
READY
007
007
008
008
009
011
011
012
012
012
013
016
017
019
020
021
022
RECORDING
022
023
024
024
025
025
026
026
027
System chart
Package Contents
Sold Separately
Identification of features
Front & Top
Back
Bottom
Smart dial
Self-timer lamp
Camera Status Lamp
Mode icon
Connecting to a Power Source
Inserting the memory card
Instructions on how to use the memory
card
When using the camera for the first time
LCD monitor indicator
How to use the menu
Starting the recording mode
Selecting modes
How to use the Smart Auto mode
How to use the Program mode
How to use the Aperture. Shutter Priority
mode
How to use the Manual mode
How to use the User Setting shooting
mode
How to use the Nightscene modes
How to use the Beauty Shot mode
How to use the Scene modes
003