Sharp LC-42SV32B Service Manual page 7

LC-42SV32B
Preparation
Supplied Accessories
Note
• Always use the AC cord supplied with the TV.
• The illustrations above are for explanation purposes and may vary slightly from the actual accessories
Attaching/Detaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC IN terminal.
• Before attaching (or detaching) the stand, spread a cushion under the TV to prevent it from being damaged.
Caution
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 Put the TV face down on a safe surface that is covered by a soft and smooth cloth.
2 Adjust the TV stand to the bottom of the TV.
3 Fasten the screws by using a cross-head screwdriver (Not supplied).
Caution
• To avoid damages, do not push too hard or put excessive pressure to the stand neck while turning the TV to suit your comfortable viewing
angle.
Note
• To detach the stand, perform the steps in reverse order.
Detaching the Stand Neck for Wall Mounting
Caution
• Please use with care while disassembling the cabinet, stand, and pillar for wall mounting.
• Detach the stand neck in the correct direction.
• Do not remove the stand neck from the TV unless mounting it with an optional wall mount
7