Notes And Specifications - Electro-Harmonix 1440 Quick Start Manual

67 FADE 70 SECONDS direct select
68 FADE 80 SECONDS direct select
69 FADE 90 SECONDS direct select
70 FADE 99 SECONDS direct select
CC# Function
3 Button Presses
7 LEVEL knob
26 OVERDUB knob
27 TEMPO knob
TEMPO knob
110
resolution
112 Fadeout Time setting
115 Loop Direct Select
116 EXTC setting
117 SWFX setting
1440 Stereo Looper
t Audio input impedance for each input: 1MΩ
t Audio output impedance for each output: 370Ω
t Current draw: 150mA
t Maximum input signal level: +6 dBu
t Loop time: 24 minutes
t Audio quality: 24-bit, 44.1kHz Sample rate
t Bypass and dry signal: high quality analog buffered bypass at unity gain; dry
signal is analog through the 1440.
1440 Loop Manager Application System Requirements
t MAC: Operating system must be macOS X Sierra (10.12) or higher.
t Windows: Operating system must be Windows 7 or higher.
MIDI Control Change (CC) Table
CC Value
Data Range
1 to 70
0 to 127
0 to 127
0 to 127
0 to 1
0 to 99
1 to 20
0 to 3
0 to 4

Notes and Specifications

Sets fadeout to 70 seconds
Sets fadeout to 80 seconds
Sets fadeout to 90 seconds
Sets fadeout to 99 seconds
Notes
Mimic all MIDI PC functions when CC
message of matching value is received
Adjust loop volume level
Adjust overdub feedback level
Adjust tempo if applicable
TM.KN setting: 0 = Coarse, 1 = Fine
0 = Fadeuut disabled, 1 = 1 second
fadeout, 2 = 2 second fadeout, etc.
1 = Loop 1, 2 = Loop 2, etc.
Select EXTC setting: 0 = CX.4B, 1 = XT.4B,
2 = CX.3B, 3 = XT.3B
Selext SWFX setting: 0 = STOP, 1 = OCT, 2
= REV, 3 = RV.OC, 4 = TRIG
- 18 -