Finding A Contacts Entry - Samsung SCH-R380 User Manual

Tip: You can also launch Metro411 from Standby mode by selecting
• Memory Info: Display used and available memory for Contacts
entries.

Finding a Contacts Entry

.
Voice Method
Use the Voice SVC Lookup command to view contact information
for any named contact stored in your Contacts list by saying the
name.
Note: The Contacts command shows the requested Contact information in
the display but does not dial any phone numbers for the Contact.
To look up information for a specific contact:
In Standby mode, press and hold
1.
The VOICE COMMANDS menu appears in the display and
"Please say a command" is pronounced through the
speaker.
Say "Contacts" followed by some or all of the name of the
2.
Contact you want to view, exactly as it appears in your
Contacts list. A choice list of up to three Contacts appears
in the display, and VoiceSVC prompts you with "Did you
say?" followed by the first name on the list.
Say "Yes" to confirm the name or "No" to hear the next
3.
name, or use the keypad to select the correct name from
the list. (For more information, refer to "Voice SVC" on
page 83.)
to launch Voice SVC.
Understanding Your Contacts 38