To exit Vibrate Mode:
While in Vibrate mode and Standby mode, press the
Volume key Up until the Master Volume screen shows a
setting other than Vibrate Only. The Vibrate Mode icon
(
) disappears from the display.
Speakerphone Mode
Speakerphone mode lets you use your phone hands-free and/or
share calls with others.
Entering Speakerphone Mode: In Standby mode or during a call,
•
press and hold
.
Exiting Speakerphone Mode: In Standby mode or during a call, press
•
and hold
or, end the call.
Hands-free Mode
Hands-free mode lets you operate your phone remotely, without
touching it other than to turn it on or off.
To place your phone in Hands-free mode, do one of the
following:
• Connect an optional wired headset.
– or –
• Pair and connect an optional Bluetooth technology headset or
hands-free car kit. (For more information, refer to "Add New
Device" on page 82.)
Camera Mode
Camera mode lets you take pictures with your phone's camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures. (For more information, refer to
"Camera" on page 69.)
Entering Camera Mode: In Standby mode, press and hold the Camera
•
key (
) — on the right side of the phone — then select Camera.
Exiting Camera Mode: Press
•
Note: You can also enter Camera mode while in Standby mode, by selecting
Menu
Multimedia
Camera.
Input Mode
Input mode determines how you enter text, numbers, and
symbols. Optional text input modes are T9word, T9Word,
T9WORD, abc, Abc, ABC, 123/Sym, and Symbols. While at any text
entry screen, press the left soft key (
between the optional modes. (For more information, refer to
"Entering Text" on page 16.)
Tip: You can toggle between abc, Abc and ABC entry modes or between
T9word, T9Word, and T9WORD entry modes by pressing
You can toggle between Abc and 123/Sym entry modes by pressing
.
),
, or
to toggle
.
Understanding Your Phone
.
24