Samsung SCH-R380 User Manual page 31

Voice Dialing
The voice recognition capabilities of your Samsung R380 are
exceptional due to advanced, speaker-independent technology.
This means you do not need to "train" your phone to understand
your voice. You can use your voice in a natural manner to dial
numbers.
Note: End Calls Before relaunching the VoiceSignal voice recognition
software — When you use Voice Dialing to make a call, you must end
that call before you can use other Voice Commands. See "Voice SVC"
on page 83 for more information.
Use the Call command to dial any number stored in your Contacts
list by saying the name of the contact (Name Dialing). You can
also use Call to dial any telephone number, even numbers not
stored in your contact list, by speaking the individual digits in the
number (Digit Dialing).
Voice Dialing Tips:
Wait for the beep before speaking.
•
• Speak clearly at a normal volume, as if you were talking to someone
on the phone.
When saying a name, say the first name then the last name.
•
Dialing a Name
To dial a name, do the following:
In Standby mode, press and hold
1.
"Please say a command" appears in the display and is
pronounced through the earpiece.
Say, "Call".
2.
You are prompted to "Please say the name or number...".
Speak clearly and say the name of a person in your
3.
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with "Did
you say?" followed by the first name on the list.
Say "Yes" to confirm the name or "No" to hear the next
4.
name, or use the keypad to select the correct name from
the list. (See "Voice SVC" on page 83, for more
information.)
• Press Repeat to say the name again.
• Press to exit VoiceSignal without dialing.
.
Call Functions 28