Battery Status - Canon Selphy CP510 User Manual

4
Attach the power cord to the
Compact Power Adapter CA-
CP200 and plug it into a
power outlet.
5
Connect the compact power
adapter cable to the printer.
The power button lights orange while
charging and turns off once the battery
pack is fully charged.
If the power button is pressed and the
printer's power turns on while
charging the battery pack, charging
will stop. Pressing the power button
again will turn off the printer and
charging will resume.
6
Disconnect the compact
power adapter cable from the
printer once charging is
complete.
The battery pack can be used to
power the printer.
When the battery pack is used to power the printer, the printer will automatically turn off if it
is idle for 5 minutes or more.

Battery Status

If battery status is low, the printer's power button blinks orange.
Also, the camera's LCD monitor or printer's LCD monitor (CP710 only) display an error
message (p. 62).
Switch the battery pack for a fully charged one or recharge the battery pack.
56
Compact power
adapter
Compact power adapter cable
To power outlet
Power cord
Power button