Table of Contents
Advertisement
Activating Visibility
From the Home screen, touch
and network
Bluetooth settings and touch Visible.
The phone is now activated for discovery for 119 seconds
so you can pair with another device. After 119 seconds the
phone becomes undiscoverable again.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
From the Home screen, touch
1.
and networks
Bluetooth settings and touch Scan devices.
Your phone begins scanning and lists any discovered
devices in the Bluetooth devices section.
Touch a device name to pair with the device.
2.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
Enter a PIN to pair with the device, if one is required, and
3.
touch OK.
152
Tethering
Settings
Wireless
Settings
Wireless
Using the Tethering feature, you can share your phone's mobile
data connection with your computer using a USB cable, then use
your phone as a portable Wi-Fi hotspot.
USB tethering works with Windows Vista or Windows 7. If you are
running an earlier version of Windows you may have to prepare
your computer in order to establish a network connection using
USB.
1.
Connect an optional USB cable to your phone and your
computer.
Note: You cannot use the phone as a mass storage device and use the
tethering feature at the same time. Remove the SD card from the
phone, and disconnect from your PC before you initiate the Tethering
feature. For more information, refer to "Unmounting the SD card" on
page 43.
From the Home screen, touch
2.
and network
Tethering.
Touch USB tethering.
3.
The phone starts sharing its mobile network data
connection with the computer, using this connection.
Settings
Wireless
Advertisement
Table of Contents
