Table of Contents
Advertisement
Note: This illustration displays both the correct and incorrect orientation for
connecting the charger. If the charger is incorrectly connected,
damage to the accessory port will occur therefore voiding the phone's
warranty.
Plug the charger's power plug into a standard AC wall
2.
outlet.
When charging is finished, first unplug the charger's power
3.
plug from the AC wall outlet, then disconnect the charger's
connector from the phone.
Important!: If your handset has a touch screen display, please note that a
touch screen responds best to a light touch from the pad of your
finger or a non-metallic stylus. Using excessive force or a
metallic object when pressing on the touch screen may damage
the tempered glass surface and void the warranty. For more
information, refer to "Standard Limited Warranty" on page 200.
Low Battery Indicator
When the battery level is low and only a few minutes of talk time
remain, a warning tone sounds and the "Low battery" message
repeats at regular intervals on the display. In this condition, your
phone conserves its remaining battery power, by dimming the
backlight.
When the battery level becomes too low, the phone automatically
turns off.
Power Control
Active applications, Wi-Fi, Bluetooth, GPS, Synchronization,
Location consent, or the LCD Brightness functionality all act to
drain your battery.
The Power Control shortcut bar was designed to quickly activate
(turn on), or deactivate (turn off) those functions or applications
that use the most battery power.
The following is a list of helpful tips that can help conserve your
battery power:
Reduce your backlight time.
•
Turn off Bluetooth, Wi-Fi and Synchronization when not in use.
•
Deactivate the GPS when it is not needed. Most applications that use
•
this function periodically query the GPS satellites for the current
location; each query drains your battery.
Turn off Automatic application synchronization.
•
Getting Started
9
Advertisement
Table of Contents
