Tethering - Samsung SGH-T959V User Manual

Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set up many of
the device's Wi-Fi services, including:
• Setting the Wi-Fi sleep policy
Viewing the device's MAC Address
•
Configuring use of either a DHCP or Static IP
•
To access the Wi-Fi Advanced Settings menu:
Press
1.
Wireless and network
Press and then tap Advanced.
2.

Tethering

This option allows you to share your phone's mobile data
connection via a direct USB connection between your phone and
computer. A wireless version of this same functionality would be
the Mobile AP feature.
Note: You can not mount your phone's microSD card to your computer while
using the USB tethering feature. If additional software or USB drivers
are required, navigate to:
downloads .
Press
1.
Wireless and network
173
and then tap (Settings)
Wi-Fi settings.
http://www.samsung.com/us/support/
and then tap (Settings)
Tethering and portable hotspot.
Plug in the USB cable between your computer and your
2.
phone.
When prompted for a USB mode, press
3.
menu.
Tap USB tethering from the Tethering menu. This places a
4.
green check mark next to the entry and activates the
feature. A Tethering or Hotspot active notification briefly
appears on the screen.
Look for the Tethering active icon
area of the screen.
To disconnect tethering:
Press and then tap
1.
Wireless and network
2. Tap USB tethering from the Tethering menu to remove the
check mark and deactivate the feature.
Remove the USB cable from the phone.
3.
to exit the
in the Status bar
(Settings)
Tethering and portable hotspot.