Bluetooth Settings - Samsung SGH-T679 User Manual

WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard
for easy and secure wireless network set up and
connections. To use WPS, the connecting device must
support WPS and be compatible with Wi-Fi Protected
Access (WPA) security. WPS can automatically set up
a random network name and WPA wireless security
for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a
network name and wireless security PIN.
Press
1.
(Settings) Wireless and network
settings.
Tap WPS button connection.
2.
Press the WPS button on your Wi-Fi access
3.
point within 2 minutes.
Manually Adding a Wi-Fi Network
Press
1.
(Settings) Wireless and network
settings.
Tap Wi-Fi to turn it on.
2.
Tap Add Wi-Fi network.
3.
Enter the SSID (Service Set Identifier) and
4.
Security settings then tap Save.
164
and then tap
Wi-Fi
and then tap
Wi-Fi
Note: An SSID is a unique key which identifies a wireless LAN.
Its purpose is to stop other wireless equipment from
accessing your LAN — whether accidentally or
intentionally. To communicate, wireless devices must be
configured with the same SSID.

Bluetooth settings

In this menu you can activate Bluetooth, view or
assign a device name, activate your phone so other
Bluetooth devices can discover it, or scan for other,
available Bluetooth devices with which to pair.
Activating Bluetooth
Press
(Settings) Wireless and network
settings and tap Bluetooth to turn it on.
Note: Bluetooth must be enabled prior to use.
Activating the Device Name
Press
1.
(Settings) Wireless and network
settings Device name. The assigned device
name displays.
Press to erase the current device name
2.
and enter a new name for this device using the
keyboard.
Tap OK to confirm your setting.
3.
and then tap
Bluetooth
and then tap
Bluetooth