Power Saving Mode - Samsung SGH-T679 User Manual

• Auto-rotate screen: when enabled, the phone
automatically switches from portrait to landscape
orientation and vice versa. When this setting is
disabled, the phone displays in portrait mode only.
• Animation: determines whether some or all of the
window elements animate. Selections are: No
animations, Some animations, or All animations.
• Screen timeout: adjusts the delay time before the
screen automatically turns off. Selections are:
15 seconds, 30 seconds, 1 minute, 2 minutes,
10 minutes, and 30 minutes.
• Touch key light duration: to adjust the light duration
of the touch keys..
• Horizontal calibration: uses the accelerometer to
calibrate the phone when held in a horizontal position.
Adjusting Screen Brightness
This feature configures the LCD Brightness levels.
Press
1.
(Settings) Display
Touch and slide the on-screen slider to adjust
2.
the level and tap OK.
Horizontal Calibration
Calibrate your phone by using the built-in
accelerometer.
Press
1.
(Settings) Display
174
and then tap
Brightness.
and then tap
Horizontal calibration.
Place the phone on a level surface and tap
2.
Calibrate. The phone adjusts the level of the
accelerometer. During the calibration process a
green circle appears on-screen and the center
circle adjusts to the center position.

Power Saving Mode

This feature allows you both automatically set the
phone to use a power saving mode and configure
additional power saving options manually, all in an
effort to conserve battery power.
Press
1.
(Settings) Power saving mode.
Confirm appears at the top of the screen.
2.
This indicates the power saving mode is active.
To automatically enable power saving options:
Press
1.
(Settings) Power saving mode.
Tap Use Power saving mode to enable this
2.
feature when the battery level is low.
Tap Power saving mode on at to assign the
3.
"battery low" level at which the power saving
mode is activated. It is at this level that the
automatic power saving function will "kick in".
Tap OK to store the new battery level.
4.
and then tap
and then tap