Table of Contents
Advertisement
Figure 28. CentOS SATA Flash Drive selection screen
4. Using the arrow keys, select the Save & Exit tab.
5. Highlight the Save Changes and Exit listing, then press the Enter key.
The Save & Exit Setup window displays.
6. Highlight Yes then press the Enter key.
Figure 29. Save configuration confirmation screen
The system starts to boot. The ADVA login screen displays.
24
Configure BIOS and install ADVA 18.4 operating system installation to SSD
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EMC Virtual Edge Platform 1405 Series and is the answer not in the manual?
Questions and answers