Samsung Dart SGH-T499 User Manual page 144

Setup Phone Vibration
Press
1.
(Settings) Sound
Tap Vibrate and select a vibration mode.
2.
Choose from: Always, Never, Only in Silent
mode, or Only when not in Silent mode.
Note: The Phone vibrate setting is independent of
other call sounds settings. For example, if you
have Silent mode enabled with Phone vibrate,
your phone won't play a ringtone, but will
vibrate for an incoming call.
Adjusting the Volume Settings
The Volume menu now provides access to various
volume settings within one on-screen popup menu.
Press
1.
(Settings) Sound
Touch and drag the on-screen slider to assign
2.
the volume settings for any of the following
volume levels.
• Ringtone, Media, Alarm, System volume, or
Notification.
Tap OK to assign the volume levels.
3.
Setup the Voice Call Ringtone
Press
1.
(Settings) Sound.
Tap Phone ringtone.
2.
Tap a ringtone from the available list. The
3.
ringtone briefly plays when selected.
140
and then tap
and then tap
Volume.
and then tap
Tap OK to assign a ringer.
4.
Setting a Notification Ringtone
Press
1.
(Settings) Sound
Tap one of the ringtones and tap OK.
2.
Audible Tone Settings
The Audible touch tones and Audible selection
options are used when you use the dialing pad or
making a screen selection. Each time you press a
key or make a selection the selected tone sounds.
Press
1.
(Settings) Sound.
Tap Audible touch tones or Audible selection. A
2.
check mark displayed next to these features
indicates active status.
Screen Lock Sounds
The screen lock sounds option is used to activate/
deactivate sounds when locking and unlocking the
screen.
Press
1.
(Settings) Sound.
Tap Screen lock sounds. A check mark
2.
displayed next to these features indicates
active status.
and then tap
Notification ringtone.
and then tap
and then tap